{"id":106,"date":"2026-10-27T14:40:09","date_gmt":"2026-10-27T14:40:09","guid":{"rendered":"https:\/\/laundryaide.com\/?post_type=la_news&p=106"},"modified":"2026-10-27T14:40:09","modified_gmt":"2026-10-27T14:40:09","slug":"choosing-electric-or-gas-heating-for-a-commercial-tumble-dryer","status":"publish","type":"la_news","link":"https:\/\/ar.laundryaide.com\/index.php\/news\/choosing-electric-or-gas-heating-for-a-commercial-tumble-dryer\/","title":{"rendered":"Choosing Electric or Gas Heating for a Commercial Tumble Dryer"},"content":{"rendered":"\n

Electric and gas heating can both support reliable tumble-dryer production, but they place different demands on the building. The right choice depends on available utilities, local energy prices, ventilation, installation rules and the number of loads the laundry must finish each day.<\/p>\n\n\n\n

Heating capacity should never be considered alone. Airflow, exhaust ducting, drum loading and the moisture remaining after extraction all influence real drying time.<\/p>\n\n\n\n

\"Electric
Confirm the available electrical service, gas supply and exhaust route before selecting a dryer heating source.<\/figcaption><\/figure>\n\n\n\n

Begin with the utilities already available<\/h2>\n\n\n\n

A project may have three-phase electrical power but no suitable gas line, or it may have a strong gas supply while electrical capacity is limited. Extending either utility can change the installation budget, schedule and approval process.<\/p>\n\n\n\n

Before comparing machines, record the site voltage, frequency, phase, available electrical load, gas type, gas pressure, exhaust route and local installation requirements. These facts are more useful than selecting a heating source from energy price alone.<\/p>\n\n\n\n

When electric heating is practical<\/h2>\n\n\n\n

Electric heating is often straightforward where sufficient electrical capacity is already available. It avoids a combustion gas connection and can simplify utility coordination in hotels, healthcare facilities, laundromats and on-premise laundries that already operate around an electrical service plan.<\/p>\n\n\n\n

The main question is total connected load. In the Laundry Aide commercial dryer range, listed electric-heating power rises with capacity\u2014from 10.8 kW for the CD-16 and 12 kW for the CD-20 to 21 kW for the CD-30 and 36 kW for the CD-60. These values must be added to the drive, fan and other site loads when the electrical system is reviewed.<\/p>\n\n\n\n

When gas heating is practical<\/h2>\n\n\n\n

Gas heating can be attractive where gas is available, local energy costs support it and the laundry needs regular daily throughput. It may reduce the electrical heating load, but it introduces other requirements that must be planned correctly.<\/p>\n\n\n\n

The project team should confirm the exact gas type, supply pressure, pipe sizing, shut-off arrangement, combustion air and local approval requirements. Gas specifications are destination-specific, so the current project data sheet and installation instructions should be reviewed before ordering or site work begins.<\/p>\n\n\n\n

Airflow remains essential for both options<\/h2>\n\n\n\n

Heat releases moisture from textiles, but airflow must carry that moisture out of the drum. A restrictive duct, long route, undersized outlet or poorly supplied make-up air can extend drying time even when the heater has enough power.<\/p>\n\n\n\n

\"Commercial
Dryer performance depends on the complete airflow path from room make-up air to the external exhaust outlet.<\/figcaption><\/figure>\n\n\n\n

For reference, the published CD series lists exhaust volumes from 1,200 m\u00b3\/h for the CD-16 and CD-20 to 1,700 m\u00b3\/h for the CD-30 and 2,500 m\u00b3\/h for the CD-60. Exhaust outlet sizes also increase from 160 mm to 240 mm across the range. Final duct design should consider length, bends, discharge position and applicable local rules.<\/p>\n\n\n\n

Controls and electrical work still matter on a gas dryer<\/h2>\n\n\n\n
\"Commercial
Drive, fan, control and safety circuits are checked as part of the dryer assembly process.<\/figcaption><\/figure>\n\n\n\n

A gas-heated dryer still needs electrical power for the drum drive, fan, control system and safety devices. Voltage and phase therefore remain part of the quotation and installation discussion for every heating option.<\/p>\n\n\n\n

Match the dryer to the washer and daily schedule<\/h2>\n\n\n\n

Heating source is only one selection factor. Dryer capacity should align with washer batch size, extraction performance, textile mix and the operating window. Towels and heavy cotton retain more water than many mixed garments, while better extraction can reduce the moisture that reaches the dryer.<\/p>\n\n\n\n

For a project comparison, prepare the following information:<\/p>\n\n\n\n